![DSC_0126[1].JPG](https://images.squarespace-cdn.com/content/v1/61727a0ea9d99e0e4fdb39a1/1635726386469-BBTZP0EUDJQJOKPNHBE0/DSC_0126%5B1%5D.JPG)
Viper Barrel Vise
Our barrel vise will handle barrels from .775” to 1.375“in diameter. The powder coat finish is so durable it grips barrels like a gorilla. The powder coat finish will also NOT harm the barrel in any way and will not leave any marks whether blued or stainless. With our barrel vise there is no need for leather, spacers, cardboard or used toilet paper rolls unless from certain manufacturers, see below! The bolts are Loctite in place. Max torque on the barrel vise nuts/bolts should be 50 ft/lbs. DO NOT use an impact gun! Mounting holes are 9/16” diameter and 5.750” center to center spacing. This vise may leave marks on a Cerakote or painted barrels (use wraps of drywall tape or paper towel core to prevent paint marks) some use leather as well. This vise may crush the carbon fiber part of a carbon fiber barrel.
We have found when working on rifles manufactured from some companies Howa, Remington or Tikka that the action can be very tight. This is not bad, it’s just how they make their products. Viper recommends wrapping barrels of Howa, Remington and Tikka.
Viper advises wrapping the barrel when working with rifles where the torque of the action to barrel is unknown. Viper also advises wrapping the barrel when torquing the nuts over 50 lbs. This will help to prevent damage to the powder coat finish. This will help your Viper Barrel Vise last for years.
We do ship outside the US please contact us through the Contact Us page we will be happy to get the best shipping rates for you!!
Standard is red powder coat top with black powder coat base. Please see below for customization options.
We can add emblems or special powder coat to customize your barrel vise to your liking. For questions regarding customization please call or email us! If you would like to place an order over the phone or have any questions about our Barrel Vise contact Rod at (269)967 9955 or use our contact page.
Our barrel vise has a lifetime warranty against manufacturing defects. But there have been times when the springs, washers or nuts have gotten lost. We do have replacement parts.
For replacement nuts, washer and springs kit please see the Replacement Parts page.
For product questions, cancellations or returns please contact us through the Contact Us page.
Our barrel vise will handle barrels from .775” to 1.375“in diameter. The powder coat finish is so durable it grips barrels like a gorilla. The powder coat finish will also NOT harm the barrel in any way and will not leave any marks whether blued or stainless. With our barrel vise there is no need for leather, spacers, cardboard or used toilet paper rolls unless from certain manufacturers, see below! The bolts are Loctite in place. Max torque on the barrel vise nuts/bolts should be 50 ft/lbs. DO NOT use an impact gun! Mounting holes are 9/16” diameter and 5.750” center to center spacing. This vise may leave marks on a Cerakote or painted barrels (use wraps of drywall tape or paper towel core to prevent paint marks) some use leather as well. This vise may crush the carbon fiber part of a carbon fiber barrel.
We have found when working on rifles manufactured from some companies Howa, Remington or Tikka that the action can be very tight. This is not bad, it’s just how they make their products. Viper recommends wrapping barrels of Howa, Remington and Tikka.
Viper advises wrapping the barrel when working with rifles where the torque of the action to barrel is unknown. Viper also advises wrapping the barrel when torquing the nuts over 50 lbs. This will help to prevent damage to the powder coat finish. This will help your Viper Barrel Vise last for years.
We do ship outside the US please contact us through the Contact Us page we will be happy to get the best shipping rates for you!!
Standard is red powder coat top with black powder coat base. Please see below for customization options.
We can add emblems or special powder coat to customize your barrel vise to your liking. For questions regarding customization please call or email us! If you would like to place an order over the phone or have any questions about our Barrel Vise contact Rod at (269)967 9955 or use our contact page.
Our barrel vise has a lifetime warranty against manufacturing defects. But there have been times when the springs, washers or nuts have gotten lost. We do have replacement parts.
For replacement nuts, washer and springs kit please see the Replacement Parts page.
For product questions, cancellations or returns please contact us through the Contact Us page.
Our barrel vise will handle barrels from .775” to 1.375“in diameter. The powder coat finish is so durable it grips barrels like a gorilla. The powder coat finish will also NOT harm the barrel in any way and will not leave any marks whether blued or stainless. With our barrel vise there is no need for leather, spacers, cardboard or used toilet paper rolls unless from certain manufacturers, see below! The bolts are Loctite in place. Max torque on the barrel vise nuts/bolts should be 50 ft/lbs. DO NOT use an impact gun! Mounting holes are 9/16” diameter and 5.750” center to center spacing. This vise may leave marks on a Cerakote or painted barrels (use wraps of drywall tape or paper towel core to prevent paint marks) some use leather as well. This vise may crush the carbon fiber part of a carbon fiber barrel.
We have found when working on rifles manufactured from some companies Howa, Remington or Tikka that the action can be very tight. This is not bad, it’s just how they make their products. Viper recommends wrapping barrels of Howa, Remington and Tikka.
Viper advises wrapping the barrel when working with rifles where the torque of the action to barrel is unknown. Viper also advises wrapping the barrel when torquing the nuts over 50 lbs. This will help to prevent damage to the powder coat finish. This will help your Viper Barrel Vise last for years.
We do ship outside the US please contact us through the Contact Us page we will be happy to get the best shipping rates for you!!
Standard is red powder coat top with black powder coat base. Please see below for customization options.
We can add emblems or special powder coat to customize your barrel vise to your liking. For questions regarding customization please call or email us! If you would like to place an order over the phone or have any questions about our Barrel Vise contact Rod at (269)967 9955 or use our contact page.
Our barrel vise has a lifetime warranty against manufacturing defects. But there have been times when the springs, washers or nuts have gotten lost. We do have replacement parts.