![DSC_0091[1].JPG](https://images.squarespace-cdn.com/content/v1/61727a0ea9d99e0e4fdb39a1/1635726741423-7FWXNA6V84EG0YOF39NK/DSC_0091%5B1%5D.JPG)
![DSC_0084[1].JPG](https://images.squarespace-cdn.com/content/v1/61727a0ea9d99e0e4fdb39a1/1635726810893-AZ904QHV5590SWYXT8ED/DSC_0084%5B1%5D.JPG)
Viper 3 in 1 Bolt, Action Truing and Chambering Fixture-
Bolt Truing Fixture, Chambering Fixture and Action Truing Fixture. "Truly a 3 in 1 Fixture" This is the one originally designed by “The Viper, Bob Pastor”. If it is from Viper, it will have our name on it!
Used by the U.S. Marine Corp Shooting Team gunsmiths. Don’t be fooled by imitations! If it doesn’t say “Viper Bench Rest”, it’s not from Viper!
Chamber any length or contoured barrel, Pistol or Rifle, from the chuck side of your lathe. True up Remington actions with the same fixture. True up any bolt and bolt face. Will hold any diameter up to 1.500”
Depending on the model this chambering fixture can be used with either a three, four or six jaw chuck and in a chuck as small as 3 inches!! We have 3 models to choose from in silver aluminum.
One has 4 flats full length; this fits a four-jaw chuck. This will fit a 4 inch or larger 4 jaw chuck.
Second has just under 4-inch diameter round to fit a 3, 4 or 6 jaw chuck 4-inch diameter or larger.
Third has been turned down to just under 3-inch diameter. This will fit a 3-inch or larger 3, 4 or 6 jaw chuck.
Our chambering fixtures have a lifetime warranty against manufacturing defects. But there are times when the copper tip screws get lost or damaged. Please see the replacement parts page.
We do ship outside the US please contact us through the Contact Us page we will be happy to get the best shipping rates for you!!
Can be customized with special engraving like a shooting event. Please do not ask for a company logo. For $45, please call or email Rod at (269) 967-9955 or use the contact page.
For replacement set screws, please see the Replacement Parts page!
Our Fulfillment, Warranty, Return, Terms and Conditions, Website accessibility and Privacy Policy and other policies can be found on the about page Here.
For product questions, cancellations or returns please contact us through the Contact Us page.
All of our products are AMERICAN made. If you would like to place an order, just go to the item below to order completely online and avoid the CC fees. We can take orders over the phone also (CC fees will apply to phone orders), please call or text sales at (269) 830-8881 or have any questions about our products or customization call or text Rod at (269)967 9955 or use our contact page. Email: rodweber@viperbenchrest.com
Bolt Truing Fixture, Chambering Fixture and Action Truing Fixture. "Truly a 3 in 1 Fixture" This is the one originally designed by “The Viper, Bob Pastor”. If it is from Viper, it will have our name on it!
Used by the U.S. Marine Corp Shooting Team gunsmiths. Don’t be fooled by imitations! If it doesn’t say “Viper Bench Rest”, it’s not from Viper!
Chamber any length or contoured barrel, Pistol or Rifle, from the chuck side of your lathe. True up Remington actions with the same fixture. True up any bolt and bolt face. Will hold any diameter up to 1.500”
Depending on the model this chambering fixture can be used with either a three, four or six jaw chuck and in a chuck as small as 3 inches!! We have 3 models to choose from in silver aluminum.
One has 4 flats full length; this fits a four-jaw chuck. This will fit a 4 inch or larger 4 jaw chuck.
Second has just under 4-inch diameter round to fit a 3, 4 or 6 jaw chuck 4-inch diameter or larger.
Third has been turned down to just under 3-inch diameter. This will fit a 3-inch or larger 3, 4 or 6 jaw chuck.
Our chambering fixtures have a lifetime warranty against manufacturing defects. But there are times when the copper tip screws get lost or damaged. Please see the replacement parts page.
We do ship outside the US please contact us through the Contact Us page we will be happy to get the best shipping rates for you!!
Can be customized with special engraving like a shooting event. Please do not ask for a company logo. For $45, please call or email Rod at (269) 967-9955 or use the contact page.
For replacement set screws, please see the Replacement Parts page!
Our Fulfillment, Warranty, Return, Terms and Conditions, Website accessibility and Privacy Policy and other policies can be found on the about page Here.
For product questions, cancellations or returns please contact us through the Contact Us page.
All of our products are AMERICAN made. If you would like to place an order, just go to the item below to order completely online and avoid the CC fees. We can take orders over the phone also (CC fees will apply to phone orders), please call or text sales at (269) 830-8881 or have any questions about our products or customization call or text Rod at (269)967 9955 or use our contact page. Email: rodweber@viperbenchrest.com
Bolt Truing Fixture, Chambering Fixture and Action Truing Fixture. "Truly a 3 in 1 Fixture" This is the one originally designed by “The Viper, Bob Pastor”. If it is from Viper, it will have our name on it!
Used by the U.S. Marine Corp Shooting Team gunsmiths. Don’t be fooled by imitations! If it doesn’t say “Viper Bench Rest”, it’s not from Viper!
Chamber any length or contoured barrel, Pistol or Rifle, from the chuck side of your lathe. True up Remington actions with the same fixture. True up any bolt and bolt face. Will hold any diameter up to 1.500”
Depending on the model this chambering fixture can be used with either a three, four or six jaw chuck and in a chuck as small as 3 inches!! We have 3 models to choose from in silver aluminum.
One has 4 flats full length; this fits a four-jaw chuck. This will fit a 4 inch or larger 4 jaw chuck.
Second has just under 4-inch diameter round to fit a 3, 4 or 6 jaw chuck 4-inch diameter or larger.
Third has been turned down to just under 3-inch diameter. This will fit a 3-inch or larger 3, 4 or 6 jaw chuck.
Our chambering fixtures have a lifetime warranty against manufacturing defects. But there are times when the copper tip screws get lost or damaged. Please see the replacement parts page.
We do ship outside the US please contact us through the Contact Us page we will be happy to get the best shipping rates for you!!
Can be customized with special engraving like a shooting event. Please do not ask for a company logo. For $45, please call or email Rod at (269) 967-9955 or use the contact page.
For replacement set screws, please see the Replacement Parts page!
Our Fulfillment, Warranty, Return, Terms and Conditions, Website accessibility and Privacy Policy and other policies can be found on the about page Here.
For product questions, cancellations or returns please contact us through the Contact Us page.
All of our products are AMERICAN made. If you would like to place an order, just go to the item below to order completely online and avoid the CC fees. We can take orders over the phone also (CC fees will apply to phone orders), please call or text sales at (269) 830-8881 or have any questions about our products or customization call or text Rod at (269)967 9955 or use our contact page. Email: rodweber@viperbenchrest.com